TIG-GMAW AC DC Welding Machine

Product Price :Get Latest Price

Product BrochureOrigo™ Tig 3000i AC/DC, TA24 AC/DC For demanding TIG welding applications

Designed for high quality TIG-welding
Origo™ Tig 3000i AC/DC welding power source provide excellent arc strike and consistent, stable arc in both DC and AC modes. Typical materials for AC welding include aluminium, aluminium alloys and magnesium alloys. With stainless steel, mild steel and copper alloys being typical for DC.

AC welding with QWave™
One of the most important tasks of a TIG welding power source is to provide a stable arc. Origo™ Tig 3000i AC/DC with the QWave™ function, which optimises the AC wave form to give a smooth arc and at the same time the lowest possible noise without compromising the weld result. This machine also has True AC rating where set current is always equal to the true current

Specifications:- 

• Setting range TIG AC/DC 4-300
• Setting range MMA 16-300
• Mains supply, V/Ph 400/3
• Fuse (slow), A 20
• Mains cable, Ø mm2 4 x 1.5
• Maximum output DC/AC
• at 35% duty cycle, TIG , A/V 300/22
• at 60% duty cycle, TIG, A/V 240/19.6
• at 100% duty cycle, TIG, A/V 200/18
• Slope up, sec 0-10
• Slope down, sec 0-10
• Gas post-flow, sec 0-25
• Pulse frequency DC, sec 0.01-2.5
• Frequency AC, Hz 10-150
• AC balance, % 50-98
• Open circuit voltage, V DC 54-64
• Energy save mode, W 30
• Power factor at 100% , at TIG mode 0.72
• Operating temperature, C -10 to +40
• Efficiency at 100%, at TIG mode, % 67
• Enclosure class IP 23C
• Insulation class (Main trafo.) H
• Standards: IEC/EN 60974-1, -3, -10
• External dimensions mm, lxwxh 652x412x423
• Weight, kg 42

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Product Price :Get Latest Price

Product BrochureProduct Details:

The Caddy® is already a classic power source in the mobile welding equipment field. With the introduction of the Caddy® Tig 2200i AC/DC series and a full range of accessories, you will find the optimal solution for a wide range of TIG welding applications.

Offering true portability
Not only is Caddy® Tig 2200i AC/DC small and of low weight. Thanks to its intelligent, compact design it is easy to take along to different indoor and outdoor worksites and also to tuck away when not used, making it handy both in the workshop and on the move.

Single phase mains connection makes it easy to find an electricity supply for the unit, and it works equally well when powered by a portable generator.

Thanks to the built-in PFC circuit the machine can operate with extra long mains cables, over 100 m, giving the welder a very large working radius.

Impact resistant design
Composite materials in combination with smart design solutions provide a durable and impact resistant machine, adapted to rough conditions. The control panel is recessed, which provides additional protection and durability. Caddy® Tig 2200i AC/DC has sturdy and impact resistant cable connectors with OKC 50.

Improving the weld quality
With the TA33 version you only need to set the plate thickness. The machine controls the rest and can be trusted to always help the welder achieve consistent, high quality welding results. Hotter or colder welds can easily be obtained by adjusting the knob. 

Specifications:-

• Mains supply, V/Ph Hz 230/1 50/60 Hz
• Fuse (slow), A 16
• Recommended generator size, KvA 12
• Mains cable, mm2 3 x 2.5
• Maximum output
• at 20% duty cycle, TIG , A/V 220/18,8
• at 60% duty cycle, TIG, A/V 150/16,0
• Setting range TIG AC/DC, A 3-220
• Setting range MMA, A 4-160
• Open circuit voltage, V DC
• VRD inactive 46-60
• VRD active <35
• Power factor
• at maximum current, at TIG mode 0,99
• Efficiency at maximum current,
• at TIG mode, % 66
• Dimensions LxWxH, mm 418x188x345
• Weight, kg 15 Enclosure class IP 23
• Application class Standards
• Operating temperature, °C -10 to +40

Water cooling unit CoolMini :

• Cooling capacity, W, l/min at 40°C 700/1,0
• Coolant volume, l 2,2
• Max flow, l/min 2
• Max pressure, 50/60 Hz, bar 2.3 bar
• Weight, kg 6,7 E
• xternal dimension, LxWxH, mm 418x188x137

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Product Price :Get Latest Price

Product BrochureProduct Details:

Designed for high quality TIG-welding

Origo™ Tig 4300iw AC/DC welding power source provide excellent arc strike and consistent, stable arc in both DC and AC modes. Typical materials for AC welding include aluminium, aluminium alloys and magnesium alloys. With stainless steel, mild steel and copper alloys being typical for DC.

AC welding with QWave™

One of the most important tasks of a TIG welding power source is to provide a stable arc. Origo™ Tig 4300iw AC/DC with the QWave™ function, which optimises the AC wave form to give a smooth arc and at the same time the lowest possible noise without compromising the weld result.

True AC rating continually monitors the actual current and automatically adjusts the output to maintain the preset current irrespective of variations in the welding circuit layout.

Easy to use

Origo™ TA24 AC/DC’s offer the necessary functions for TIG AC/DC and MMA AC/DC welding in an easy to understand MMC panel. AC Balance is the setting to control arc cleaning and penetration and AC Frequency setting is to control arc width.  

It also has a setting to control Electrode preheating with a possibility to have different shapes of the electrode and at the same time provide better starts with an extended life time of the electrode.

Specifications:- 

• Setting range TIG AC/DC 4 - 430
• Setting range MMA 16 - 430
• Mains supply, V/Ph 400/3
• Fuse type C MCB, A 25
• Mains cable, Ø mm2 4 x 4
• Maximum output DC/AC
• at 40% duty cycle, TIG , A/V 430/27.2
• at 60% duty cycle, TIG, A/V 400/26
• at 100% duty cycle, TIG, A/V 315/22.6
• Slope up, sec 0-10 Slope down, sec 0-10
• Gas post-flow, sec 0-25
• Pulse frequency DC, sec 0.01-2.5
• Frequency AC, Hz 10-152 AC balance, % 50-98
• Open circuit voltage, U0 max, V
• Without VRD function 1) 83
• MMA VRD function deactivated 2) 60
• VRD function activated 2) <35 Energy save mode, W 75 Power factor at 100% , at TIG mode 0.89 Operating temperature, C -10 to +40 Continual sound pressure at no load, db (A) >< 70
• Energy save mode, W 75
• Power factor at 100% , at TIG mode 0.89
• Operating temperature, C -10 to +40
• Continual sound pressure at no load, db (A) < 70
• Efficiency at 100%, at TIG mode, % 76
• Enclosure class IP 23
• Insulation class (Main trafo.) H
• Standards: IEC/EN 60974-1,-2,-3,-10
• External dimensions mm, lxwxh 625x394x776
• Weight, kg incl.
• cooling unit 95 
• Water cooling unit: Integrated
• Cooling capacity, kW, l/min at 40 C 2.0/1.0
• Coolant volume, l 5.5
• Max flow, l/min 2.0
• Max pressure, 50/60 Hz bar 3.4